METAL CONDITIONER

Verylube Metal Conditioner

A completely synthetic concentrated multicomponent product, composed on the basis of the latest discoveries in tribology and chemistry.

It is formulated especially for internal combustion engines. It is used for complex protection of friction parts of gasoline and diesel engines, including turbo-charged.

DESCRIPTION

Increases engine power
Increases compression
Reduces noise and vibration
Decreases oil consumption
Improves dynamic characteristics of a vehicle
Decreases fuel consumption
Improves motor oil properties
Protects engine parts from wear
Makes cold start easy
Reduces harmful exhausts

APPLICATION

Pour the conditioner into warmed up engine through the oil filler neck
Let the engine idle for 3 minutes
The conditioner works during the whole service life of the oil

Note: Optimal concentration: 3% of the oil volume. Overdose up to 50% is allowed, i.e. up to 4.5% of the oil volume. The conditioner has gentle detergent properties that remove carbon from piston rings. To achieve the maximum effect — use regularly with every oil change.

Atomic Metal Conditioner

Maximum Twin Turbo with complex adaptive 1 Stage Revitalizant®. A completely synthetic concentrated multicomponent product, composed on the basis of the latest discoveries in tribology and chemistry. It is formulated specially for internal combustion

engines. It is used for complex protection of friction parts of

gasoline and diesel engines, including turbo-charged.

DESCRIPTION

Restores surfaces of parts and compensates the ongoing wear;
Levels and increases compression in cylinders;
Increases pressure in the oil system up to the nominal one;
Creates the active system of parts protection from loads and overheating;
Reduces noise and vibrations;
Improves oil lubricating properties and tribological characteristics of the engine assemblies;
Increases the service life span of the engine;
Reduces fuel consumption;
Increases engine capacity and acceleration capability.
Heals damages of the friction surface up to 0.2 mm depth, due to the newest technology of the complex adaptive Revitalizant® (CAR).
Due to CAR, for the first time along with restoration and antiwear protection provides the extended level of surface regeneration properties.
RF=100 Plus;
RF (Revitalization® factor) — index of restoration and antiwear protection of the engine;
RF=100 Plus means that as a result of product application the engine has undergone the full Revitalization® cycle. It is completely restored, reliably protected from wear and provides regenerative properties of the coating* for 100,000 km of run.

*If within 100,000 km of run after the treatment a scratch appears on the friction

surface, e.g. as a result of occasional entry of a hard grain, this scratch will be

completely healed, due to the special properties and compressing stress in the

skin layer of the ceramic-metal coating.

APPLICATION

The temperature of the compound before application should not be lower than +25 °C. Shake the bottle.
Introduce the compound into the oil filler neck of the engine, warmed up to the operating temperature. Start the engine and idle it for 3–5 minutes.
Drive your car in regular mode.

ATTENTION!!!

Not intended for use in internal combustion engines with a special hardening coating of the cylinders (ALUSIL, LOKASIL, NIKASIL, GALNIKAL) due to the absence of the material necessary to form a stable ceramic-metal layer.

Page updated

Google Sites

Report abuse